MENU
Averaging Axial Extensometers

Averaging Axial Extensometers

Extensometers for materials testing Averaging Axial Extensometers – Model 3442AVG This all-purpose averaging axial extensometer is used in tension or compression to measure Young’s modulus, offset yield, and strain to failure. It is compact and lightweight....
For Environmental Chambers

For Environmental Chambers

Extensometers for materials testing High Temperature Un-Cooled Extensometers (700 °C) – Model 7642 For use in environmental chambers where the entire extensometer must be exposed to elevated temperatures. These capacitive extensometers may be used up to 700 °C...
All-Purpose Axial Extensometers

All-Purpose Axial Extensometers

General purpose extensometers for axial tensile, compression, and cyclic testing. Gauge lengths from 10 to 80 mm (and 0.5 to 2 inches) and full scale measuring ranges from 5% to 100% strain.

Transverse (Diametral)

Transverse (Diametral)

Extensometers for materials testing Transverse (Diametral) Extensometers – Model 3575 Designed for general purpose transverse or diametral strain measurement on axially loaded specimens. This model may be used simultaneously with the Model 3542 axial...
Averaging Transverse

Averaging Transverse

Extensometers for materials testing Sheet Metal r-Value Extensometers – Model 3575AVG Designed for measuring plastic strain ratio (r-value) in sheet metal testing, this extensometer averages the lateral strain at two locations. This model may be used...